reformat docstrings for sphinx

README.md

@@ -2,16 +2,10 @@
 Package summary goes here, ideally with a diagram
 
 # Install
-Installation instructions
+The `trainlib` package can be installed from PyPI:
 
 ```sh
-pip install <package>
+pip install trainlib
-```
-
-or as a CLI tool
-
-```sh
-uv tool install <package>
 ```
 
 # Development
@@ -20,16 +14,16 @@ uv tool install <package>
 - Depending on needs, install the development dependencies with `uv sync
   --extra dev`.
 
-# Testing
+## Testing
 - To run the unit tests, make sure to first have the test dependencies
   installed with `uv sync --extra test`, then run `make test`.
 - For notebook testing, run `make install-kernel` to make the environment
   available as a Jupyter kernel (to be selected when running notebooks).
 
-# Documentation
+## Documentation
 - Install the documentation dependencies with `uv sync --extra doc`.
 - Run `make docs-build` (optionally preceded by `make docs-clean`), and serve
-  locally with `docs-serve`.
+  locally with `make docs-serve`.
 
 # Development remarks
 - Across `Trainer` / `Estimator` / `Dataset`, I've considered a

doc/Makefile

@@ -0,0 +1,20 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line, and also
+# from the environment for the first two.
+SPHINXOPTS    ?=
+SPHINXBUILD   ?= sphinx-build
+SOURCEDIR     = .
+BUILDDIR      = _build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

doc/_templates/autosummary.md

@@ -0,0 +1,9 @@
+# {{ fullname | escape }}
+
+```{automodule}
+{{ fullname }}
+:members:
+:undoc-members:
+:show-inheritance:
+:imported-members:
+```

doc/_templates/autosummary/module.rst

@@ -0,0 +1,8 @@
+{{ fullname | escape | underline}}
+
+.. automodule:: {{ fullname }}
+   :members:
+   :undoc-members:
+   :show-inheritance:
+   :imported-members:
+

doc/conf.py

@@ -0,0 +1,49 @@
+# Configuration file for the Sphinx documentation builder.
+#
+# For the full list of built-in configuration values, see the documentation:
+# https://www.sphinx-doc.org/en/master/usage/configuration.html
+
+# -- Project information ------------------------------------------------------
+# https://www.sphinx-doc.org/en/master/usage/configuration.html#project-information
+
+project = "<package-name>"
+copyright = "2025, Sam Griesemer"
+author = "Sam Griesemer"
+
+# -- General configuration ----------------------------------------------------
+# https://www.sphinx-doc.org/en/master/usage/configuration.html#general-configuration
+
+extensions = [
+    "sphinx.ext.autodoc",
+    # enables a directive to be specified manually that gathers module/object
+    # summary details in a table
+    "sphinx.ext.autosummary",
+    # allow viewing source in the HTML pages
+    "sphinx.ext.viewcode",
+    # only really applies to manual docs; docstrings still need RST-like
+    "myst_parser",
+    # enables Google-style docstring formats
+    "sphinx.ext.napoleon",
+    # external extension that allows arg types to be inferred by type hints
+    "sphinx_autodoc_typehints",
+]
+autosummary_generate = True
+autosummary_imported_members = True
+
+# include __init__ definitions in autodoc
+autodoc_default_options = {
+    "special-members": "__init__",
+}
+
+templates_path = ["_templates"]
+exclude_patterns = ["_build", "Thumbs.db", ".DS_Store"]
+
+
+# -- Options for HTML output --------------------------------------------------
+# https://www.sphinx-doc.org/en/master/usage/configuration.html#options-for-html-output
+
+html_theme = "furo"
+html_static_path = ["_static"]
+# html_sidebars = {
+#    '**': ['/modules.html'],
+# }

doc/index.md

@@ -0,0 +1,29 @@
+# `<project-name>` package docs 
+{ref}`genindex`
+{ref}`modindex`
+{ref}`search`
+
+```{eval-rst}
+.. autosummary::
+   :nosignatures:
+
+    # list modules here for quick links
+```
+
+```{toctree}
+:maxdepth: 3
+:caption: Autoref
+
+_autoref/<project-name>.rst
+```
+
+```{toctree}
+:maxdepth: 3
+:caption: Contents
+
+reference/documentation/index
+reference/site/index
+```
+
+```{include} ../README.md
+```

doc/make.bat

@@ -0,0 +1,35 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=.
+set BUILDDIR=_build
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.https://www.sphinx-doc.org/
+	exit /b 1
+)
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+
+:end
+popd

doc/reference/documentation/index.md

@@ -0,0 +1,5 @@
+# Documentation
+
+```{toctree}
+sphinx
+```

doc/reference/documentation/sphinx.md

@@ -0,0 +1,111 @@
+# Sphinx
+The primary driver of this package's documentation is Sphinx's `autodoc` extension,
+using the [Furo theme][1]. 
+
+**High-level details**:
+
+- `sphinx-apidoc` generates package-based documentation to the `_autoref/` directory,
+  with navigation available under "Autoref" in the sidebar.
+- Markdown-based documentation files are manually written under the `reference/`
+  directory, showing up under "Contents" in the sidebar.
+
+## Detailed directory structure
+All files are placed under `docs/sphinx`: 
+
+- `_`-prefixed are Sphinx-managed directories
+    * `_build/html/` houses output HTML files
+    * `_autoref/` is the target for module-based RST files written by `autodoc`
+- `reference/`: houses all manually written documentation (totally separate from
+  auto-generated package docs)
+- `conf.py`: single Sphinx configuration file
+- `index.md`: documentation index, setups up a persistent sidebar across all other pages
+
+For manually written documentation under `reference/`, topics are nested as needed. Within
+a nested directory `reference/<topic>`, an `index.md` should created with content like:
+
+```
+# <Topic>
+
+\`\`\`{toctree}
+:hidden:
+
+sub-topic-1.rst
+sub-topic-2.rst
+...
+\`\`\`
+```
+
+This will add the nested directory to the sidebar navigation, using the name set under the
+top-level header. See [Markdown syntax][#markdown-syntax] for more details on the syntax.
+
+## Sphinx autodoc
+Sphinx's `autodoc` extension allows automatic generation of documents according to
+(Python) subpackage structure and available docstrings. A few notes here:
+
+- In the `conf.py` file, autodoc is enabled by adding `"sphinx.ext.autodoc"` to
+  the extensions list. `"sphinx.ext.viewcode"` can also be added to provide
+  links to source code.
+- Documents are actually generated by calling the `sphinx-apidoc` CLI command. The
+  current Makefile uses the following call:
+
+  ```sh
+  sphinx-apidoc --module-first -o docs/sphinx/_autoref/ localsys
+  ```
+
+  This writes the automatically generated docs for modules in the package at the
+  local directory `localsys/` to the `docs/sphinx/_autoref` directory. These are
+  reStructuredText files by default.
+    * `--module-first` places the module-level descriptions at the top of the module page.
+      By default, this is placed at the bottom (oddly), and can be obscured by large lists
+      of subpackages if this flag isn't provided.
+    * See available `sphinx-apidoc` options [here][2], as well as more advanced config
+      [here][3].
+
+
+## Markdown syntax
+The `myst_parser` extension enables Markdown (or something close to it) to be used when
+writing documentation files. The Sphinx directives can be difficult to track, and
+they change slightly under the MyST Markdown syntax. The following are a few common
+blocks:
+
+**Page hierarchies**: the following will generate link hierarchy according to the provided
+pages:
+
+```
+\`\`\`{toctree}
+:maxdepth: <n>
+:caption: <caption>
+:hidden:
+
+example-file-1
+example-file-2
+example-dir/index
+...
+\`\`\`
+```
+
+- `:maxdepth:` limits the depth of nesting
+- `:caption:` title for the group of pages
+- `:hidden:` if provided, links will only show in the sidebar (hidden on the page)
+- Constituent files: listed files will be rendered as a link directly. If a listed file
+  has a `{toctree}` directive, this tree will be rendered in place of the page's link as a
+  dropdown. The dropdown will be named according to the file's top-level heading, and
+  clicking directly on the dropdown header will show that page's content. Files found in
+  the tree will be placed as links under the dropdown, recursively subject to same rules
+  described here.
+
+**Include files**: the following will include file content
+pages:
+
+```
+\`\`\`{include} README.md
+\`\`\`
+```
+
+**Reference directives**
+
+
+[1]: https://pradyunsg.me/furo/
+[2]: https://www.sphinx-doc.org/en/master/man/sphinx-apidoc.html
+[3]: https://www.sphinx-doc.org/en/master/usage/extensions/autodoc.html#
+

example/dataset.py

@@ -0,0 +1,20 @@
+from typing import NamedTuple
+
+from trainlib.domain import SequenceDomain
+from trainlib.datasets.memory import TupleDataset
+
+
+class Record(NamedTuple):
+    a: int
+    b: str
+
+tl_domain = SequenceDomain[Record]([
+    Record(1, "1"),
+    Record(2, "2"),
+])
+
+class R0(TupleDataset[Record]):
+    item_tuple = Record
+
+    def _process_item_data(self, item_data, item_index):
+        return (item_data[0],)

pyproject.toml

@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
 
 [project]
 name = "trainlib"
-version = "0.1.0"
+version = "0.1.1"
 description = "Minimal framework for ML modeling. Supports advanced dataset operations and streamlined training."
 requires-python = ">=3.13"
 authors = [

trainlib/dataset.py

@@ -1,5 +1,5 @@
 """
-Marginalizing out the modality layer:
+.. admonition:: Marginalizing out the modality layer
 
     With ``domain`` being an instance variable, one possible interpretation of
     the object structures here is that one could completely abstract away
@@ -58,7 +58,10 @@ Marginalizing out the modality layer:
     particular case of ``_process_batch_data()``, it feels much better when
     it's on the inside.)
 
-Holding:
+.. admonition:: Holding area
+
+    .. code-block:: python
+
         @abstractmethod
         def _get_uri_groups(self) -> Iterable[tuple[U, ...]]:
             Get URI groups for each batch.
@@ -67,19 +70,19 @@ Holding:
             metadata file), zip the URIs such that we have a tuple of URIs per
             batch.
 
-        Note that this effectively defines the index style over batches in the
+            Note that this effectively defines the index style over batches in
-        attached domain. We get an ``int -> tuple[U, ...]`` map that turns
+            the attached domain. We get an ``int -> tuple[U, ...]`` map that
-        batch indices into URIs that can be read under the domain.
+            turns batch indices into URIs that can be read under the domain.
             ``get_batch()`` turns an integer index into its corresponding
-        ``tuple[U, ...]``, reading the resources with ``_read_resources()`` in
+            ``tuple[U, ...]``, reading the resources with ``_read_resources()``
-        the tuple, treating them as providers of batched data.
+            in the tuple, treating them as providers of batched data.
             ``_read_resources()`` passes through to the attached domain logic,
-        which, although common, need not supply an explicit iterable of batch
+            which, although common, need not supply an explicit iterable of
-        items: we just access items with ``__getitem__()`` and may ask for
+            batch items: we just access items with ``__getitem__()`` and may
-        ``__len__``. So the returned URI group collection (this method) does
+            ask for ``__len__``. So the returned URI group collection (this
-        need to be iterable to measure the number of batches, but the batch
+            method) does need to be iterable to measure the number of batches,
-        objects that are ultimately produced by these URI groups need not be
+            but the batch objects that are ultimately produced by these URI
-        iterables themselves.
+            groups need not be iterables themselves.
 
             raise NotImplementedError
 
@@ -91,23 +94,27 @@ Holding:
             Read batch files at the provided paths.
 
             This method should operate on a single tuple from the list of batch
-        tuples returned by the ``_get_uri_groups()`` method. That is, it reads
+            tuples returned by the ``_get_uri_groups()`` method. That is, it
-        all of the resources for a single batch and returns a tuple of the same
+            reads all of the resources for a single batch and returns a tuple
-        size with their contents.
+            of the same size with their contents.
 
             Note: the dependence on a batch index is mostly here to make
-        multi-dataset composition easier later. In-dataset, you don't need to
+            multi-dataset composition easier later. In-dataset, you don't need
-        know the batch index to to simply process URIs, but across datasets you
+            to know the batch index to to simply process URIs, but across
-        need it to find out the origin of the batch (and process those URIs
+            datasets you need it to find out the origin of the batch (and
-        accordingly).
+            process those URIs accordingly).
 
             return tuple(self.domain.read(uri) for uri in uri_group)
 
-# pulling the type variable out of the inline generic b/c `ty` has trouble
+    .. code-block:: python
-# understanding bound type variables in subclasses (specifically with Self@)
-T = TypeVar("T", bound=NamedTuple)
 
-class NamedTupleDataset[I](Dataset):
+        # pulling the type variable out of the inline generic b/c `ty` has
+        # trouble understanding bound type variables in subclasses
+        # (specifically with Self@)
+
+        T = TypeVar("T", bound=NamedTuple)
+
+        class NamedTupleDataset[I](Dataset):
             def __init__(self, data_list: list[I]) -> None:
                 self.data_list = data_list
 
@@ -156,38 +163,41 @@ class BatchedDataset[U, R, I](Dataset):
     which are used to concretize a domain ``Domain[U, R]``), and an item type
     ``T`` (which has a ``tuple`` upper bound).
 
-    Pipeline overview:
     
-    ```
+    .. admonition:: Pipeline overview
+
+        .. code-block:: python
+        
             Domain -> [U] (get _batch_uris)
             U -> R (domain access ; Rs provide batches)
             R -> [I] (cache here ; _process_batch_data to use load_transform)
             [I] -> I (human item obj ; _get_item)
             I -> **P (final packed item ; __getitem__ to use transform)
-    ```
 
         Note^1: as far as positioning, this class is meant to play nice with
         PyTorch DataLoaders, hence the inheritance from ``torch.Dataset``. The
-    value add for this over the ``torch.Dataset`` base is almost entirely in
+        value add for this over the ``torch.Dataset`` base is almost entirely
-    the logic it implements to map out of *batched resources* that are holding
+        in the logic it implements to map out of *batched resources* that are
-    data, and flattening it out into typical dataset items. There are also some
+        holding data, and flattening it out into typical dataset items. There
-    QoL items when it comes to splitting and balancing samples. 
+        are also some QoL items when it comes to splitting and balancing
+        samples. 
 
-    Note^2: even though ``Domains`` implement iterators over their URIs, this
+        Note^2: even though ``Domains`` implement iterators over their URIs,
-    doesn't imply a ``BatchedDataset`` is iterable. This just means we can walk
+        this doesn't imply a ``BatchedDataset`` is iterable. This just means we
-    over the resources that provide data, but we don't necessarily presuppose
+        can walk over the resources that provide data, but we don't necessarily
-    an ordered walk over samples within batches. Point being:
+        presuppose an ordered walk over samples within batches. Point being:
         ``torch.Dataset``, not ``torch.IterableDataset``, is the appropriate
         superclass, even when we're working around iterable ``Domains``.
 
         Note^3: transforms are expected to operate on ``I``-items and produce
-    ``I``-items. They shouldn't be the "introducers" of ``I`` types from some
+        ``I``-items. They shouldn't be the "introducers" of ``I`` types from
-    other intermediate representation, nor should they map from ``I`` to
+        some other intermediate representation, nor should they map from ``I``
-    something else. Point being: the dataset definition should be able to map
+        to something else. Point being: the dataset definition should be able
-    resources ``R`` to ``I`` without a transform: that much should be baked
+        to map resources ``R`` to ``I`` without a transform: that much should
-    into the class definition. If you find you're expecting the transform to do
+        be baked into the class definition. If you find you're expecting the
-    that for you, you should consider pulling in some common structure across
+        transform to do that for you, you should consider pulling in some
-    the allowed transforms and make it a fixed part of the class.
+        common structure across the allowed transforms and make it a fixed part
+        of the class.
     """
 
     def __init__(

trainlib/estimator.py

@@ -24,7 +24,7 @@ from torch import nn, Tensor
 from torch.optim import Optimizer
 from torch.utils.tensorboard import SummaryWriter
 
-from trainlib.util.type import OptimizerKwargs
+from trainlib.utils.type import OptimizerKwargs
 
 logger: logging.Logger = logging.getLogger(__name__)
 

trainlib/estimators/tdnn.py

@@ -1,10 +1,7 @@
 import logging
-from collections.abc import Generator
 
-import torch
 import torch.nn.functional as F
 from torch import nn, Tensor
-from torch.optim import Optimizer
 from torch.nn.utils.parametrizations import weight_norm
 
 logger: logging.Logger = logging.getLogger(__name__)

trainlib/trainer.py

@@ -11,6 +11,7 @@ from collections.abc import Callable
 import torch
 from tqdm import tqdm
 from torch import cuda, Tensor
+from torch.optim import Optimizer
 from torch.nn.utils import clip_grad_norm_
 from torch.utils.data import Dataset, DataLoader
 from torch.utils.tensorboard import SummaryWriter
@@ -98,6 +99,151 @@ class Trainer[I, K: EstimatorKwargs]:
         self._stagnant_epochs = 0
         self._best_model_state_dict: dict[str, Any] = {}
 
+    def _train_epoch(
+        self,
+        train_loader: DataLoader,
+        batch_estimator_map: Callable[[I, Self], K],
+        optimizers: tuple[Optimizer, ...],
+        writer: SummaryWriter,
+        max_grad_norm: float | None = None,
+    ) -> list[float]:
+        """
+        Train the estimator for a single epoch.
+        """
+
+        train_loss_sums = []
+        self.estimator.train()
+        with tqdm(train_loader, unit="batch") as train_epoch:
+            for i, batch_data in enumerate(train_epoch):
+                est_kwargs = batch_estimator_map(batch_data, self)
+                inputs = est_kwargs["inputs"]
+
+                # one-time logging
+                if self._step == 0:
+                    writer.add_graph(
+                        ModelWrapper(self.estimator),
+                        est_kwargs
+                    )
+
+                # once-per-epoch logging
+                if i == 0:
+                    self.estimator.epoch_write(
+                        writer,
+                        step=self._step,
+                        val=False,
+                        **est_kwargs
+                    )
+
+                train_losses = self.estimator.loss(**est_kwargs)
+                train_loss_items = []
+                for o_idx, optimizer in enumerate(optimizers):
+                    optimizer.zero_grad()
+                    train_loss = next(train_losses)
+
+                    if len(train_loss_sums) <= o_idx:
+                        train_loss_sums.append(0.0)
+
+                    train_loss_item = train_loss.item()
+                    train_loss_sums[o_idx] += train_loss_item
+                    train_loss_items.append(train_loss_item)
+
+                    train_loss.backward()
+
+                    # clip gradients for optimizer's parameters
+                    if max_grad_norm is not None:
+                        clip_grad_norm_(
+                            self._get_optimizer_parameters(optimizer),
+                            max_norm=max_grad_norm
+                        )
+
+                    optimizer.step()
+
+                self._step += len(inputs)
+
+                for train_loss_item, train_loss_sum in zip(
+                    train_loss_items,
+                    train_loss_sums,
+                    strict=True,
+                ):
+                    train_epoch.set_postfix(loss=f"{train_loss_sum/(i+1):8.2f}")
+                    self._add_summary_item("train_loss", train_loss_item)
+
+                estimator_metrics = self.estimator.metrics(**est_kwargs)
+                for metric_name, metric_value in estimator_metrics.items():
+                    self._add_summary_item(
+                        f"train_{metric_name}",
+                        metric_value
+                    )
+
+            self.estimator.epoch_step()
+
+            for li, train_loss_sum in enumerate(train_loss_sums):
+                self._add_summary_item(
+                    f"train_loss{li}_epoch", train_loss_sum / len(train_loader)
+                )
+
+        return train_loss_sums
+
+    def _val_epoch(
+        self,
+        val_loader: DataLoader,
+        batch_estimator_map: Callable[[I, Self], K],
+        optimizers: tuple[Optimizer, ...],
+        writer: SummaryWriter,
+    ) -> list[float]:
+        """
+        Perform and record validation scores for a single epoch.
+        """
+
+        val_loss_sums = []
+        self.estimator.eval()
+        with tqdm(val_loader, unit="batch") as val_epoch:
+            for i, batch_data in enumerate(val_epoch):
+                est_kwargs = batch_estimator_map(batch_data, self)
+
+                # once-per-epoch logging
+                if i == 0:
+                    self.estimator.epoch_write(
+                        writer,
+                        step=self._step,
+                        val=True,
+                        **est_kwargs
+                    )
+
+                val_losses = self.estimator.loss(**est_kwargs)
+                val_loss_items = []
+                for o_idx in range(len(optimizers)):
+                    val_loss = next(val_losses)
+
+                    if len(val_loss_sums) <= o_idx:
+                        val_loss_sums.append(0.0)
+
+                    val_loss_item = val_loss.item()
+                    val_loss_sums[o_idx] += val_loss_item
+                    val_loss_items.append(val_loss_item)
+
+                for val_loss_item, val_loss_sum in zip(
+                    val_loss_items,
+                    val_loss_sums,
+                    strict=True,
+                ):
+                    val_epoch.set_postfix(loss=f"{val_loss_sum/(i+1):8.2f}")
+                    self._add_summary_item("val_loss", val_loss_item)
+
+                estimator_metrics = self.estimator.metrics(**est_kwargs)
+                for metric_name, metric_value in estimator_metrics.items():
+                    self._add_summary_item(f"val_{metric_name}", metric_value)
+
+            for li, val_loss_sum in enumerate(val_loss_sums):
+                self._add_summary_item(
+                    f"val_loss{li}_epoch", val_loss_sum / len(val_loader)
+                )
+
+            # convergence of multiple losses may be ambiguous
+            self._val_loss = sum(val_loss_sums) / len(val_loader)
+
+        return val_loss_sums
+
     def train(
         self,
         dataset: BatchedDataset[..., ..., I],
@@ -122,19 +268,21 @@ class Trainer[I, K: EstimatorKwargs]:
         """
         Note: this method attempts to implement a general scheme for passing
         needed items to the estimator's loss function from the dataloader. The
-        abstract `Estimator` base only requires the model output be provided
+        abstract ``Estimator`` base only requires the model output be provided
         for any given loss calculation, but concrete estimators will often
-        require additional arguments (e.g., labels or length masks, as
+        require additional arguments (e.g., labels or length masks, as is the
-        is the case with sequential models). In any case, this method defers
+        case with sequential models). In any case, this method defers any
-        any further logic to the `loss` method of the underlying estimator, so
+        further logic to the ``loss`` method of the underlying estimator, so
         one should take care to synchronize the sample structure with `dataset`
-        to match that expected by `self.estimator.loss(...)`.
+        to match that expected by ``self.estimator.loss(...)``.
         
-        On batch_estimator_map:
+        .. admonition:: On batch_estimator_map
 
-        Dataloader collate functions are responsible for mapping a collection
+            Dataloader collate functions are responsible for mapping a
-        of items into an item of collections, roughly speaking. If items are
+            collection of items into an item of collections, roughly speaking.
-        tuples of tensors,
+            If items are tuples of tensors,
+
+            .. code-block::
 
                 [
                     ( [1, 1], [1, 1] ),
@@ -145,6 +293,8 @@ class Trainer[I, K: EstimatorKwargs]:
             the collate function maps back into the item skeleton, producing a
             single tuple of (stacked) tensors
             
+            .. code-block::
+
                 ( [[1, 1],
                    [2, 2],
                    [3, 3]],
@@ -153,9 +303,10 @@ class Trainer[I, K: EstimatorKwargs]:
                    [2, 2],
                    [3, 3]] )
 
-        This function should map from batches (which should be *item shaped*,
+            This function should map from batches (which should be *item
-        i.e., have an `I` skeleton, even if stacked items may be different on
+            shaped*, i.e., have an ``I`` skeleton, even if stacked items may be
-        the inside) into estimator keyword arguments (type `K`).
+            different on the inside) into estimator keyword arguments (type
+            ``K``).
 
         Parameters:
             lr: learning rate (default: 1e-3)
@@ -212,131 +363,42 @@ class Trainer[I, K: EstimatorKwargs]:
         while self._epoch <= max_epochs and not self._converged(
             self._epoch, stop_after_epochs
         ):
-            print(f"Training epoch {self._epoch}/{max_epochs}...")
+            train_frac = f"{self._epoch}/{max_epochs}"
-            print(f"Stagnant epochs {self._stagnant_epochs}/{stop_after_epochs}...")
+            stag_frac = f"{self._stagnant_epochs}/{stop_after_epochs}"
+            print(f"Training epoch {train_frac}...")
+            print(f"Stagnant epochs {stag_frac}...")
 
             epoch_start_time = time.time()
-            train_loss_sums = []
+            self._train_epoch(
-            self.estimator.train()
+                train_loader,
-            with tqdm(train_loader, unit="batch") as train_epoch:
+                batch_estimator_map,
-                for i, batch_data in enumerate(train_epoch):
+                optimizers,
-                    est_kwargs = batch_estimator_map(batch_data, self)
-                    inputs = est_kwargs["inputs"]
-
-                    # one-time logging
-                    if self._step == 0:
-                        writer.add_graph(ModelWrapper(self.estimator), est_kwargs)
-
-                    # once-per-epoch logging
-                    if i == 0:
-                        self.estimator.epoch_write(
                 writer,
-                            step=self._step,
+                max_grad_norm
-                            val=False,
-                            **est_kwargs
-                        )
-
-                    train_losses = self.estimator.loss(**est_kwargs)
-                    train_loss_items = []
-                    for o_idx, optimizer in enumerate(optimizers):
-                        optimizer.zero_grad()
-                        train_loss = next(train_losses)
-
-                        if len(train_loss_sums) <= o_idx:
-                            train_loss_sums.append(0.0)
-
-                        train_loss_item = train_loss.item()
-                        train_loss_sums[o_idx] += train_loss_item
-                        train_loss_items.append(train_loss_item)
-
-                        train_loss.backward()
-
-                        # clip gradients for optimizer's parameters
-                        if max_grad_norm is not None:
-                            opt_params = self._get_optimizer_parameters(optimizer)
-                            clip_grad_norm_(opt_params, max_norm=max_grad_norm)
-
-                        optimizer.step()
-
-                    self._step += len(inputs)
-
-                    for train_loss_item, train_loss_sum in zip(
-                        train_loss_items,
-                        train_loss_sums,
-                        strict=True,
-                    ):
-                        train_epoch.set_postfix(loss=f"{train_loss_sum/(i+1):8.2f}")
-                        self._add_summary_item("train_loss", train_loss_item)
-
-                    estimator_metrics = self.estimator.metrics(**est_kwargs)
-                    for metric_name, metric_value in estimator_metrics.items():
-                        self._add_summary_item(f"train_{metric_name}", metric_value)
-
-                self.estimator.epoch_step()
-
-                for li, train_loss_sum in enumerate(train_loss_sums):
-                    self._add_summary_item(
-                        f"train_loss{li}_epoch", train_loss_sum / len(train_loader)
             )
 
             if val_frac > 0:
-                val_loss_sums = []
+                self._val_epoch(
-                self.estimator.eval()
+                    val_loader,
-                with tqdm(val_loader, unit="batch") as val_epoch:
+                    batch_estimator_map,
-                    for i, batch_data in enumerate(val_epoch):
+                    optimizers,
-                        est_kwargs = batch_estimator_map(batch_data, self)
-                        inputs = est_kwargs["inputs"]
-
-                        # once-per-epoch logging
-                        if i == 0:
-                            self.estimator.epoch_write(
                     writer,
-                                step=self._step,
-                                val=True,
-                                **est_kwargs
                 )
 
-                        val_losses = self.estimator.loss(**est_kwargs)
-                        val_loss_items = []
-                        for o_idx in range(len(optimizers)):
-                            val_loss = next(val_losses)
-
-                            if len(val_loss_sums) <= o_idx:
-                                val_loss_sums.append(0.0)
-
-                            val_loss_item = val_loss.item()
-                            val_loss_sums[o_idx] += val_loss_item
-                            val_loss_items.append(val_loss_item)
-
-                        for val_loss_item, val_loss_sum in zip(
-                            val_loss_items,
-                            val_loss_sums,
-                            strict=True,
-                        ):
-                            val_epoch.set_postfix(loss=f"{val_loss_sum/(i+1):8.2f}")
-                            self._add_summary_item("val_loss", val_loss_item)
-
-                        estimator_metrics = self.estimator.metrics(**est_kwargs)
-                        for metric_name, metric_value in estimator_metrics.items():
-                            self._add_summary_item(f"val_{metric_name}", metric_value)
-
-                    for li, val_loss_sum in enumerate(val_loss_sums):
             self._add_summary_item(
-                            f"val_loss{li}_epoch", val_loss_sum / len(val_loader)
+                "epoch_time_sec",
+                time.time() - epoch_start_time
             )
 
-                    # convergence of multiple losses may be ambiguous
-                    self._val_loss = sum(val_loss_sums) / len(val_loader)
-
-            self._add_summary_item("epoch_time_sec", time.time() - epoch_start_time)
-
             if self._epoch % summarize_every == 0:
                 self._summarize(writer, self._epoch)
 
             # save checkpoint
             if self._epoch % chkpt_every == 0:
                 self.save_model(
-                    self._epoch, self.chkpt_dir, dir_prefix
+                    self._epoch,
+                    self.chkpt_dir,
+                    dir_prefix
                 )
 
             self._epoch += 1